Motor yacht KM-100 DON

Technical specifications

Project KM-100

General view of the boat KM-100

Living spaces plan

3D images

Basic case of the boat KM-100 DON (yacht version)

№	Item	Number
	1. Hull
1.1	Boat hull with superstructure – steel GOST 16523-97, GOST 14637-80, St3SP steel for single-shaft version	1
	2. Main power plant and auxiliary systems
2.1	YANMAR main engine (75hp) with remote control, main engine, gas exhaustion, cooling and fuel systems	1
2.2	Shaft assembly own production	1
2.3	Propeller screw casted foreign production	1
	3. Steering gear
3.1	Steering wheel (beech/oak) own production	1
3.2	Hand-operated steering hydraulic gear (foreign production): hydraulic pump MTP 5310R, hydraulic pump MTC 175	1
3.3	Emergence tiller	1
	4. Anchor
4.1	Steel welded anchor (20kg)	1
4.2	Anchor rope	50 m
	5. Mooring device
5.1	Bollard double – stainless steel	3
5.2	Mooring rope (20 m)	2х10 m
5.3	Metal fender as part of hull	1
	6. Mast device, rails and crinoline
6.1	Rail (steel)	1
6.2	Flybridge rail (steel)	1
6.3	Crinoline (steel)	1
6.4	Arched mast (steel)	1
6.5	Spar-ladder (steel)	к-т
	7. Cold water system
7.1	Fresh water tank stainless steel with piping and locking fittings	200 l
7.2	Hydrophone (foreign production)	1
	8. Plumbing system
8.1	Waste tank steel V=200 L with pipeline and fittings	1
8.2	Pumping lavatory pan (foreign production)	1
8.3	Fecal pump (foreign production)	1
8.4	Odor filter (foreign production)	1
8.5	Toilet sink	1
8.6	Galley sink	1
	9. Drying system
9.1	Hand-operated drying pump complete with hoses 10 m	1
	10. Ventilation system
10.1	Air suction vents with grating (steel)	4
10.2	Deck ejectors (foreign production)	6
	11. Electrical equipment
11.1	Navigation lights	5
11.2	Reading light – sconce (foreign production)	2
11.3	Ceiling lights (foreign production)	9
11.4	Underdeck light СС-56	3
11.5	Switch	complete
11.6	Socket 220V	complete
11.7	Socket 12V	complete
11.8	TV socket (foreign production)	complete
11.9	Signal switchboard (foreign production)	1
11.10	Storage batteries 6 СТ 190	2
11.11	Cable connection for speakers to all rooms	complete
11.12	Searchlight with remote control	1
11.13	Recharger 12V 25А (own production)	1
	12. Equipment and facilities
12.1	Opening decklight (50х50 R55) (foreign production)	1
12.2	Opening porthole PZ -77 (foreign production)	2
12.3	Reinforced-plastic door	complete
12.4	Wind wiper	complete
12.5	Knob (foreign production)	15
12.6	Porthole handle (foreign production)	4
12.7	Mirror	1
12.8	Noise and heat insulation of living spaces	complete
	13. Furniture and household equipment
13.1	Set of furniture	1
13.2	Set of curtains	1
13.3	Flooring - linoleum	к-т
13.4	Capitain’s seat – own production	1
13.5	Room planking with veneer oak and beech	complete
13.6	Toilet planking with plastic panels	complete
	14. Firefighting equipment
14.1	Hand-operated fire-extinguisher OU-2	3
	15. Safety equipment
15.1	Safety belt	2
15.2	Line for safety belt	20 m
	16. Painting and interior coating
16.1	Boat painting with own production paint-and-lacquer materials and hull solid coating
16.2	Decks painted with sand antiskid covering
16.3	Varnish coating of furniture and walls (matte varnish)

KM-100 DON motor yacht base price is 4,153,849 RUR
Construction period 10 months.

Optional equipment (options)

№	Option	Number	Note
	1. Hull
1.1	Hull with superstructures for double-shaft version (with 2 engines installed). For all modifications	1	o/e
	2. Main power plant and auxiliary systems
2.1	YANMAR engine (75 hp) complete with remote control, a set of shaftlines and welded steel prop of own production	1	instead of b/c
2.2	YANMAR second engine (75 hp) complete with remote control, a set of shaftlines, casted prop and thrust bearing assembly of foreign production (full price)	1	o/e
2.3	YANMAR engine (100 hp) complete with remote control, a set of shaftlines, and welded steel prop of own production	1	instead of b/c
2.4	YANMAR second engine (100 hp) complete with remote control, a set of shaftlines and thrust bearing assembly of foreign production (full price)	1	o/e
2.5	Welded prop (steel) of own production	1	instead of b/c
2.6	Spare prop welded (steel) own production or as second prop for double-shaft version	1	o/e
2.7	Spare prop casted foreign production or as second prop for double-shaft version	1	o/e
2.8	Propeller shaft for work in salt water conditions (stainless steel shaft)	1	instead of b/c
2.9	Second propeller shaft for work in salt water conditions (stainless steel propeller shaft) full price	1	o/e
2.10	Hull protection	1	o/e
2.11	Fuel tank volume increase up to 1800 l	1	o/e
	3. Steering gear
3.1	Electric duplicate post of driving (deckhouse, fly bridge) for single-shaft version (KM-120 Vishera model)	1	o/e
3.2	Electric duplicate post of driving (deckhouse, fly bridge) for double-shaft version (KM-120 Vishera model)	1	o/e
3.3	Steering gear foreign production	1	instead of b/c
3.4	Incrusted steering gear own production	1	instead of b/c
3.5	Rudder blade gauge complete	1	o/e
3.6	Bow thruster	1	o/e
3.7	Stern thruster (installed only with crinoline deinstallation)	1	o/e
	4. Anchor
4.1	Hand-operated windlass (foreign production)	1	instead of b/c
4.2	Electric windlass (foreign production)	1	o/e
4.3	Anchor gear device made of stainless steel own production ( anchor, anchor chain pawl, anchor platform, swivel) sanding	1	instead of b/c
4.4	Stern anchor – stainless steel, 12 kg complete with rope L - 25 r/m	1	o/e
4.5	Chain box	1	o/e
4.6	8 mm gauge anchor chain (zinced)	1r/m	o/e
4.7	Anchor chain (stainless steel)	1r/m	o/e
	5. Mooring device
5.1	Fenders (foreign production)	4	o/e
5.2	Fender holder (foreign production)	4	o/e
5.3	Fender guard rubber own production	1	o/e
5.4	KANAT fender guard foreign production	1	instead of b/c
	6. Rail and crinoline
6.1	Rail – stainless steel (welded) polished	1	instead of b/c
6.2	Crinoline - stainless steel (welded) polished	1	instead of b/c
6.3	Rail of deckhouse roof (flybridge) – stainless steel (welded) polished	1	o/e
6.4	Crinoline increased up to 1000 mm – stainless steel polished	1	instead of b/c
6.5	Arched mast – stainless steel (polished)	1	instead of b/c
6.6	Door arrangement at bulwarks	1	o/e
	7. Plumbing and shower systems
7.1	Big pumping lavatory pan (foreign production)	1	instead of b/c
7.2	Pumping lavatory pan electric driven (foreign production)	1	instead of b/c
7.3	Shower and hot water supply in toilet with foreign produced mixer, rack, electric pumping water heater 220V joint production	1	o/e
7.4	Shower and hot water supply in toilet with foreign produced mixer, rack, water heater 30 l 220 V (electric boiler) additionally heated from main engine primary flow	1	o/e
7.5	Shower and hot water supply in toilet with foreign produced mixer, rack, water heater 60 l 220 V (electric boiler) additionally heated from main engine primary flow	1	o/e
7.6	Shower and hot water supply in toilet with hot outside water provided from main engine primary flow	1	o/e
7.7	Hot and cold water shower in crinoline area	1	o/e
7.8	Faecal tank changed for stainless steel tank 200 l	1	instead of b/c
7.9	Fresh water tank volume increased up to 400 l stainless steel	1	o/e
	8. Drying system
8.1	Electric pump for water pumping with water level gauges (foreign production)	2	o/e
	9. Electric facilities
	Navigation lights and signaling equipment
9.1	Flash light ( 4 lights + control block 12 V)	complete	o/e
9.2	Marine horn 12 V (foreign production)	1	o/e
9.3	Hand-operated searchlight 12V (foreign production)	1	instead of b/c
9.4	Searchlight with remote control (foreign production)	1	instead of b/c
9.6	Tornado ship siren, combined with gas burner units	1	o/e
9.7	Ventilator for windscreen blowing	1	o/e
9.8	Engine room artificial ventilation (2 ventilators)	1	o/e
9.9	Sea version LOMBARDINI diesel generator 5 kW in noise insulation housing; 3000 rpm	1	o/e
9.10	Sea versión YANMAR diesel generator (ADA6-230ZhL-M) 8 kW; 3000 rpm	1	o/e
9.11	Sea version YANMAR diesel generator (ADC8230TYa) 8 kW; 1500 rpm	1	o/e
9.12	Noise insulation housing for diesel generator	1	o/e
9.13	Battery charger 12 V 45 Amps	1	instead of b/c
	10. Equipment and facilities
10.1	Mosquito screen for deck hatch (foreign production)	1	o/e
10.2	Mosquito screen for porthole (foreign production)	1	o/e
10.3	Armoured safety glass with tinted and shockproof tape for Aftercabin 8.5 sqm; for Traveller 8.5 sqm; for KM-120 Vishera 12 sqm; for KM-120 Toima 13 sqm; for KM-100 11 sqm.	sqm	o/e
10.4	Tent frame stainless steel for Aftercabin version	1	o/e
10.5	Tent frame stainless steel polished for Aftercabin version	1	o/e
10.6	Tent frame over deckhouse deck (cape roof) steel for Traveller version	1	o/e
10.7	Tent frame over deckhouse deck (cape roof) stainless polished steel for Traveller version	1	o/e
10.8	Tent van with sewed-in transparent windows and door openings (2 on sides 1 exit onto the stern for Aftercabin version	1	o/e
10.9	Tent roof over deck for Aftercabin version	1	o/e
10.10	Tent roof over stern deck for Traveller version	1	o/e
10.11	Tent with stainless steel frame over flybridge (KM-120 Vishera version)	1	o/e
10.12	Gangway ladder aluminum (own production)	1	o/e
10.13	Gangway ladder wood (own production)	1	o/e
10.14	Sound and noise insulation of engine room	1	o/e
10.15	Outside decorative framing of deckhouse windows stainless steel	1	o/e
10.16	Vessel door steel	1	instead of b/c
10.17	Manufacture of boat name polished stainless steel: 1 letter (height 200 mm)		o/e
10.18	Manufacture of logo stainless steel	1	o/e
10.19	Winter awning	1	o/e
10.20	Anti- vibration covering of stern bottom with anti- vibration material	1	o/e
10.21	Side opening window arrangement	1	instead of b/c
10.22	Opening windscreen arrangement	1	instead of b/c
	11. Furniture/Interior inside and deck works
11.1	Set of furniture (artificial leather)	1	instead of b/c
11.2	Set of furniture (genuine leather)	1	instead of b/c
11.3	Flybridge furnishing with cozy corner and table ( with loose tapestry elements)	1	o/e
11.4	Flybridge furnishing with cozy corner and table ( with loose vinyl artificial leather elements)	1	o/e
11.5	Captain seat (foreign production)	1	instead of b/c
11.6	Carpet flooring of inside rooms for Aftercabin – deckhouse 5 sqm, forward block 3.5 sqm; for Traveller – deckhouse 5 sqm, forward block 3.5 sqm, stern cabin 2.5 sqm; for KM-120 Vishera – forward block 4 sqm, salon 6.5 sqm; for KM-120 Toima – forward block 5 sqm, salon 7 sqm, deckhouse 4 sqm; for KM-100 8.4 sqm.	sqm	instead of b/c
11.7	Wood plank flooring of inside rooms (beech, oak); in accordance with areas p. 11.6	sqm	instead of b/c
11.8	Parquet-like flooring of inside rooms with teak plates: in accordance with areas p. 11.6	sqm	o/e
11.9	Larch lath flooring of deck for Aftercabin (25.1 sqm) – foredeck and sidedecks 7.5 sqm, fore cape 4 sqm, promenade deck 13.6 sqm; for Traveller (25.5 sqm) – upper deck 6.3 sqm, aft cape roof 7.7 sqm, foredeck and sidedecks 7.5 sqm, fore cape roof 4 sqm; for KM-120 Vishera (20 sqm) – foredeck and sidedecks 9.7 sqm, promenade deck 6.3 sqm, fore cape roof 4 sqm; for KM-120 Toima (14.6 sqm) – steering well deck with sidedecks and stairs 9.1 sqm, upper deck 5.5 sqm; for KM-100 (14.4 sqm) – steering well deck with sidedecks and stairs 14.4 sqm	sqm	o/e
11.10	Teak lath flooring of deck: in accordance with areas p. 11.6	sqm	instead of b/c
11.11	Non slip synthetic flooring of deck: in accordance with areas p. 11.9	sqm	instead of b/c
11.12	Antiseptic impregnation of deck riband: in accordance with areas p. 11.9	sqm	o/e
11.13	Larch lath flooring of deck (lose coverings): in accordance with areas p. 11.9	sqm	o/e
11.14	Interior finishing with wood and mahogany veneer (KM-100 Don)	complete	instead of b/c
11.15	Interior finishing with wood and mahogany veneer (Traveller version)	complete	instead of b/c
11.16	Interior finishing with wood and mahogany veneer (Aftercabin version)	complete	instead of b/c
11.17	Interior finishing with wood and mahogany veneer (KM-120 Vishera)	complete	instead of b/c
11.18	Interior finishing with wood and mahogany veneer (KM-120 Toima)	complete	instead of b/c
11.19	Interior finishing with wood and mahogany veneer (KM_100 Don modification)	complete	instead of b/c
11.20	Interior finishing with wood and cherry veneer (Traveller version)	complete	instead of b/c
11.21	Interior finishing with wood and cherry veneer (Aftercabin version)	complete	instead of b/c
11.22	Interior finishing with wood and cherry veneer (KM-120 Vishera)	complete	instead of b/c
11.23	Interior finishing with wood and cherry veneer (KM-120 Toima)	complete	instead of b/c
11.24	Bulwarks finishing inside: Aftercabin 11.5 sqm; Traveller 6 sqm; KM-120 Vishera 6.3 sqm; KM-120 Toima 2.9 sqm; KM-100 Don 3 sqm, finishing of wheelhouse stern wall 5 sqm for all versions with teak veneer	sqm	o/e
11.25	Bulwarks finishing inside: Aftercabin 11.5 sqm; Traveller 6 sqm; KM-120 Vishera 6.3 sqm; KM-120 Toima 2.9 sqm; KM-100 Don 3 sqm, interior screen of flybridge finishing for KM-120 Vishera 7 sqm; KM-120 Toima 5.1 sqm; KM-100 Don sqm with tent cloth and artificial stone cape rail installment	sqm	o/e
	12. Drying and household system
12.1	Galley gas cook	1	o/e
12.2	Fixed electric cook with two stove burners (metal-ceramic) 220 V	1	o/e
12.3	Microwave up to 15 kW (foreign production)	1	o/e
12.4	Webasto Air Top 3500 heater 12V with air distributing to two rooms (fore part)	1	o/e
12.5	Webasto Air Top 3500 heater 12V with air distributing to three rooms	1	o/e
12.6	Additional heating equipment in 1 room	1	o/e
12.7	V marine refrigerator – 49 l 12 V (foreign production)	1	o/e
12.8	V marine refrigerator – 90 l 12 V (foreign production)	1	o/e
12.9	Air conditioner (foreign production) for 1 cabin	1	o/e
12.10	Climate plant (cold-warm). For 1 cabin	1	o/e
12.11	Climate plant (cold-warm). For 2 cabins	1	o/e
12.12	Audio system (with СD section) foreign production. Column speakers for 1 cabin	1	o/e
12.13	Audio system (with СD section) foreign production. Column speakers for 2 cabins	1	o/e
12.14	TV-set 12V	1	o/e
12.15	DVD-player	1	o/e
	13. Navigation facilities
13.1	Compass	1	o/e
13.2	Hygrometer	1	o/e
13.3	Clock	1	o/e
13.4	Barometer	1	o/e
13.5	Clock (foreign production)	1	o/e
13.6	Barometer (foreign production)	1	o/e
	Echo sounders
13.7	Fishing echo sounder with scaling function – bottom in detail	1	o/e
13.8	Forward looking polychrome echo sounder with additional functions	1	o/e
	Radars	1
13.9	Radar with high contrast LC display for pleasure and small fishing boats. Return signals are shown with four grey shades on bright 6” LC display	1	o/e
13.10	Radar with high contrast LC display for pleasure and small fishing boats. Return signals are shown with four grey shades on bright 7” LC display. PPP, PMP certificates	1	o/e
13.11	Radar with high contrast LC display. All components, connected to NavNet, are controlled from any display of the system. NavNet technology suits ideally for systems with one or more displays. High speed of map copying. Bright displays with anti-reflection coating provide high quality of picture even in sunlight. PPP certificate	1	o/e
	Fixed GPS receivers:	1
13.12	GPS navigator. GPS-навигатор. Ultrabright 4” display (resolution 320x240 pxls), built-in world map	1	o/e
13.13	GPS receiver compact watertight with high performances. Supersensitive 12-channel receiver determines location with high precision and reliability. PPP, PMP certificates	1	o/e
13.14	GPS receiver. It is connected to fishing echo sounder, radars (without ARPA). Itinerary information is shown on display	1	o/e
	Chart plotters:	1
13.15	Chart plotter with 5” display and bright, sharp and dye image. Perfect detalization, quick copying and realistic map-making	1	o/e
13.16	Chart plotter with 5” display and bright, sharp and dye image. Perfect detalization, quick copying and realistic map-making. Two-frequency echo sounder	1	o/e
	Radio station	1
13.17	Fixed river radio station	1	o/e
13.18	Portable river radio station	1	o/e
13.19	Fixed sea radio station	1	o/e
13.20	Portable sea radio station	1	o/e
	14. Auxiliary safety facilities
14.1	Safety belts with line	1	o/e
14.2	Lifecoat	1	o/e
	15. Painting and inside coating
15.1	Hull painting, base coating, puttying with Hempel paint materials: polyurethane paints with anti-foul coating of underwater part of the boat	sqm	instead of b/c
15.2	Hull painting, base coating, puttying with Hempel paint materials: alkyd paints with anti-foul coating of underwater part of the boat	sqm	instead of b/c
15.3	All over outside hull cleansing		o/e
	16. Additional equipment
16.1	Keel block (metal) without frame	complete	o/e
16.2	Traverse with ropes (complete) 1 traverse + 4 ropes with hooks	complete	o/e
16.3	Keel block on frame	1	o/e
16.4	Flexible ropes, cargo capacity = 20 t	2	o/e
16.5	Flexible ropes, cargo capacity = 30 t	2	o/e
16.6	Rings for lifting boat with lifting gears built in the hull	complete	o/e
	17. Design changes
17.1	Interior alterations		o/e
17.2	Superstructure and ship devices change ( without hull resettlement)		o/e
	Designer’s elaboration at client’s request (more than 25% of changes)
17.3	Interior		o/e
17.4	Exterior graphics		o/e
17.5	Captain’s extra-time of work at client’s request	per day	o/e
	18.Transportation services
18.1	Transport services provided on basis of the price of 1km distance transportation (haulage truck with special trawl, accompanied by road police officer and pilot car) with counting back and forth way		o/e

o/e – optional equipment
instead of b/c – instead of base case

If you want to get detailed information about equipment list for service launch version of KM-100 DON boat, please contact us by the telephone numbers or e-mail indicated.

search